SKRL Tool and Die provides its customers a comprehensive tooling resource with extensive machining capabilities and experienced staff. SKRLís tooling capabilities range from small high-precision gauges, with tolerances of +/- .0002 inches or less in some cases, to 30,000 pound dies. SKRL has produced tooling as diverse as trunion fixtures designed to rotate the chassis of an Abrams Main Battle Tank, gauges precise enough to verify turbine blades for jet engines, and components for experimental artificial hearts. Select from the links at right to view SKRL Tool and Die's capabilities and a few examples of its products

Horizontal and Vertical Milling
Turning and EDM
Grinding and Inspection
Product Examples

 

Horizontal and Vertical Milling
The majority of SKRLís tooling work takes place on vertical and horizontal milling machines. SKRL has more then fifteen Bridgeports, two Hydrotels for longer pieces, and
three vertical CNCís with work surfaces up to 23 inches by 55 inches. SKRL uses a Hydroptic SIP jig borer for larger high-precision work. SKRL Tool and Die also employs four horizontal milling machines with 5 inch spindles and tables up to four feet by ten feet for milling large pieces such as holding blocks for die cast dies.

Back To Top

 

Turning and EDM
SKRLís lathe department contains four lathes (one a CNC) that can accept pieces up to 22 inches in diameter and over four feet long. SKRLís three EDM machines have table capacities up to four by six feet and can burn at up to 500 amps of current.

Back to Top

 

Grinding and Inspection
SKRLís grinding department has surface grinders capable of accepting pieces up to eleven inches in width, Blanchard grinders capable of accepting pieces up to 66 inches in length, and a cylindrical grinder that will accept pieces 18 inches in diameter. To inspect pieces after completion SKRL employs a comprehensive set of gauges as well as a Mitutoyo F1006 coordinate measuring machine.

Back to Top

 

Product Examples

Back to Top

Use the links below to review any sections on this page.
Back To Top Back To Machining
 
Back To Turning / EDM Back To Griniding and Inspection
 
Back To Product Examples

SKRL Die Casting, Inc ph: (440) 946-7200
34580 Lakeland Blvd. fax: (440) 946-2929
Eastlake, OH 44095 Email: sales@skrltool.com